[China Glass Network] I believe that many car owners are worried about how to remove all kinds of expired logo stickers attached to the front windshield. It is not cleaned by hand, and the front windshield of the solar film is attached, and the plastic blade cannot be used. So, how to effectively remove the logo of the front windshield? Jiangyin Yiqifeiyang Apparel Co., Ltd. , https://www.jyyqfy.com
1. Chemical removal method
"In fact, before removing the logo on the front windshield, you can first wet the logo with a hot towel, and when it is soaked, some logo stickers can be easily torn off." Wang Meng introduced the vehicle, "I have encountered For a long time, strong adhesion label, if the front windshield does not have a solar film, you can use a special cleaning solution, such as asphalt cleaner. If you do not have these scavengers, you can also use soapy water or washing powder water. It is also wet, and it can also achieve complete removal."
If the front windshield has a solar film attached, you can wipe it with a small amount of alcohol in the towel at the mark, but never spray it directly on the glass, otherwise the film will be damaged. "When the front windshield is attached to the solar film, you can't use a sharpener such as a blade to remove the sticker. Otherwise, it will scratch the glass or the solar film, and various bank cards, membership cards, and telephone cards are good tools." Stressed.
2, physical removal method
The physical removal method is actually very simple. The tool is almost everywhere, and it is the hair dryer used for hairdressing. The owner Huang Yana said that if conditions permit, use the long-term plug-in board to lead the power supply to the outside, plug in the hair dryer, and use the hot air to heat back and forth around the logo stick. After a while, the logos can be easily uncovered.
3, once and for all law
Tools that are specifically labeled with stickers, such as electrostatic stickers or suction cups, are now available on the market. The price of static electricity is not expensive. It is similar to the protection sticker for protecting the screen of the mobile phone. It is only slightly larger than the sticker. The owner can attach the sticker to the electrostatic sticker first, and then paste the static electricity on the front windshield. It is very strong and will not stick to the front windshield when removed. Static stickers are disposable, and suction pads are reusable. The suction cup sticker is similar to the ultra-thin photo frame, and the identification label is placed therein, and then the suction cup attached to the suction cup is used to fix it on the front windshield. Both of these tools are easy to install and easy to use, although the electrostatic stickers can not be recycled, but the relatively reusable suction cup stickers, the effect is more beautiful.