[China Glass Net] The use of shower room in the family is extremely high. However, the possibility of self-exposure of the shower room has always been irritating. How can we really install a high-quality and safe shower room for the home? Microfiber cleaning mitt/glove Microfiber Cleaning Mitt,Microfiber Cleaning Glove,Microfiber Makeup Removal Towel,Wash Towel Foshan Pa Tin Da Housewares Co., Ltd , https://www.ptdmicrofiber.com
Glass selection: tempered glass + explosion-proof membrane
Tempered glass is a type of safety glass, but many users think that tempered glass is equivalent to explosion-proof glass, but it is not. Different production levels, the quality of tempered glass produced will also have high and low, plus tempered glass also has three thousandths of self-explosion rate, so you should pay attention to the following points when purchasing shower glass:
3C certification - there is a basic quality assurance with the 3C logo, and it is better to stick the logo directly on the glass with laser.
Thickness 6-8mm - too thin and unsafe, too thick is not necessary, it is recommended to choose 6-8mm safety glass, knocking on the sound is crisp, the surface is vaguely textured.
The edges are flat – check the edges of the glass before use to ensure that there are no damage, the corners are leveled, and that the belt is not damaged after installation.
Look with sunglasses - bring sunglasses when you buy a shower room. If you see colored stripes on the glass, it is safe tempered glass.
Aluminum selection: multi-angle test hardness, finish
The durability of the shower room is mostly maintained by aluminum. It is usually made of aluminum alloy and needs to support several tens of kilograms of weight. Therefore, the hardness of the aluminum material directly affects the safety and service life of the shower room:
The thickness should be more than 1.2mm - good aluminum, the thickness range is between 1.2mm-1.5mm, and some can even reach 2mm, and the upper aluminum glass should be 1.5mm or more.
The hardness is above 13 degrees - the hardness of the aluminum material can be easily tested by hand pressing the aluminum frame, and the aluminum material having a hardness of 13 degrees or more is difficult for an adult to deform by hand.
The smooth surface of the aluminum material is firm in coating, bright in color and will not be corroded; its surface is smooth with no chromatic aberration and trachoma.
Optional accessories: handles, rails, wall clips are not leaky
Although the hardware accessories are small, the impact on the experience of the shower room is great, especially the flexibility of the three parts of the lever/handle, the roller slide rail and the wall clamp, and the nesting of the shower room. :
The handle is smooth and stable. The handle should not be too sharp and sharp and smooth. It is very stable. The push-pull between the pull rods is very stable. It is recommended not to use the flexible pull rod, the strength is weak.
The smooth sliding of the slide rail is good - the pulley, the wheel seat and the track are difficult to judge the compressive and heavy resistance by the naked eye, mainly because the nesting between the pulley and the track and the glass is good, the gap is small, the sliding is smooth, and the general specification mark stainless steel The material of the pulley of advanced synthetic materials will be better.
The vertical and horizontal adjustment of the wall clamp is not a problem - this is a detail that is easy to ignore. The wall clamp refers to the part of the hardware that the shower room and the wall are connected to. It must have good vertical and horizontal adjustment ability. If it is more rigid and inconvenient, it must not be Use to avoid distortion of the glass during installation and use.
Check water tightness: focus on rubber strip
In order to avoid the leakage of the shower room, the watertightness is mainly determined by the sealing of the rubber strip. When purchasing the shower room, the rigor of the shower strip should be checked repeatedly:
Look at the strips and strips - the strips between the glass doors are very magnetic, there will be no breakpoints at the hinges, and the strips should be replaced once in 1-2 years to solve the aging problem.
Observe the three seams - mainly the joint between the shower room and the wall, the joint between the door and the door, the joint between the shower room and the stone base and the bottom basin, pay attention to the crack-free gap, test the water without leakage phenomenon.
In addition to the outstanding experience of functional value, the shower room product is more important and the basic parameter is its safety. In addition to purchasing a high-quality shower room, it also needs the maintenance of the main daily shower room, such as preventing impact. Strike with sharp objects, attach a blast-proof film to the glass of the shower room, and so on.