[China Glass Net] U-glass is a kind of special-shaped glass used in a wide range of buildings. Because the cross section is U-shaped, the force of the glass is increased, so that it has higher mechanical strength than the flat glass, and the installation span is large, which can save a large number of profiles. At the same time, it has the ideal light transmission of glass; double-layer installation has better thermal insulation and sound insulation. The construction is simple and convenient, suitable for building exterior walls, internal partitions, and exterior wall decoration, making it one of the standard components of the building. U-shaped glass is a die-cast glass that is shaped by a computer-controlled glass melting furnace to maintain a constant high quality and precise size. Due to its structure, its high strength, installed in high-rise buildings or large areas where lighting is required, no additional horizontal or vertical supports are required. Due to the variety of installation methods, the building's lighting, sound and noise, thermal insulation performance is remarkable, becoming one of the new green energy-saving glass. Understand the U-shaped glass, let's take a look at the U-glass installation. U-glass installation method (1) Check whether the size and flatness of the hole meet the design requirements; (2) Check whether the side and plane of the U-shaped glass have jagged cracks or cracks; (3) Check the outer frame size and flatness of the aluminum alloy profile. U-glass installation U-shaped glass is generally installed on site, in the following order: (1) Fix the frame material in the building hole with expansion bolts or nails, and the frame can be connected by right angle or material angle. There should be at least 3 fixed points on each side of the frame. The upper and lower frames should have 1 fixed point every 400__600. (2) Cut the stabilizing plastic parts into corresponding lengths and place them in the upper and lower profiles of the frame. (3) When the U-shaped glass is placed in the frame, the inner surface of the glass should be carefully cleaned. (4) Insert the U-shaped glass in sequence. The depth of the U-shaped glass inserted into the upper frame should be greater than or equal to 20, the depth of the inserted lower frame should be greater than or equal to 12, and the depth of the inserted left and right frame materials should be greater than or equal to 20. When the U-shaped glass is inserted into the latter piece and the width of the hole is not the same as the width of the glass, the glass is cut along the length direction, and the loading is loaded according to the 18th "end glass installation order", and the plastic piece is cut into and Adjust the corresponding length to the side of the frame. (5) Insert the elastic mat in the seam between the frame and the glass. The contact surface between the mat and the glass and the frame shall not be less than 1O. (6) In the joint between the frame and the glass, the glass and the glass, and the frame and the building structure, the glass rubber type elastic sealing material (or silicone glue) is sealed. The elastic seal of the glass and the frame is narrower than 2, and the depth should be greater than or equal to 3; the thickness of the elastic seal between the U-shaped glass blocks should be greater than or equal to 1, and the seal depth toward the outdoor side should be greater than or equal to 3. (7) After the glass is completely installed, the surface dirt is removed. Moissanite Loose Stones,Moissanite Loose Gemstones,Natural Moissanite Loose Stones,Moissanite Diamond Loose Stones Guangzhou Forever Star Jewelry Limited Company , https://www.iforeverstar.com