First, the leno organization

The leno organization is characterized by a clear and evenly distributed yarn hole on the surface of the fabric. The density of the warp and weft is small, so the fabric has good air permeability, and the texture is light and thin. It is suitable for summer fabrics and interior decoration such as curtains, mosquito nets and industrial applications. Screens, etc.

The cross-weaving situation of latitude fabric warp and weft yarns is different from general fabrics. In leno fabrics, only the weft yarns are arranged parallel to each other, but the warp yarns are twisted by two system yarns (twisting warp and ground warp). That is, when weaving, the warp yarns do not move, and the warp yarns are sometimes The right side of the warp yarn is sometimes interweaved with the weft yarn at the left of the warp yarn. The yarn hole is formed by twisting and twisting left and right, and there is a large gap between the weft yarns at the twisting point. This interweaving principle is the smallest average floating tissue in all fabric structures. Therefore, the mutual positional relationship between warp and weft yarns is the most stable and is not easily displaced, such as the nets of leno tissues and the cloths used for the weaving of shuttleless looms. Waiting.

The leno organization is the general name for the organization of the yarn and the organization of Luo. Yarn organization means that each weaving of a weft yarn changes the organization of the left and right positions by twisting. The Luo organization means that every weaving of three or more odd numbered weft yarns changes the organization of the left and right positions. In the leno organization, according to the difference between the twisting direction and the twisting direction of the ground, it can be divided into two types: one is that the leno weaving is consistent with the earth twisting direction, which is called the straight twist; the other is the twisting. The leno weave, which is symmetric with the twisting direction, is called twisted pair.

Second, towel organization

Due to the uniform distribution of terry loops on the surface of the fabric, the fabric of the towel has good hygroscopicity, heat preservation and softness. It is suitable for face towels, bath towels, pillow towels, bed sheets, pajamas, bed blankets and chair cushions. The weaving of the towel fabric must have three conditions: the tissue structure of the towel, the beating mechanism for the length and short beating stroke, and the biaxial let-off. The towel tissue is formed by interweaving two systems of warp yarns (hair warp and ground warp) with a system of weft yarns. The ground weft and weft yarns are interwoven to form the base fabric and become the basis for the attachment of the terry, and the hair warp and the weft yarn interweave to form the terry. That is, the towel tissue is formed by combining ground tissue and terry tissue. Its basic organization is not complicated, and it is formed by combining 2/1 changes by re-flattening or 3/1 changing by re-flattening and then changing.

The towel fabrics are divided into two-sided towels, single-sided towels and fancy towels according to the distribution of terry, and are divided into three latitude towels (two short and one long) and four in accordance with the changing laws of the beating and weaving process. Weft towel (beating short run three short and one long). When weaving, the density of the terry can be changed by changing the arrangement ratio of the ground warp and the hair warp; the height of the terry can be changed by changing the course distance of the short and long beating strokes.


For more content, please follow this site

100% Polyester Bedding Sets

Bedding Sets,Polyester Bed Set,100 Polyester Sheet Sets,100 Polyester Bedding Sets

changxing sanxing textile co.,ltd , https://www.sxhometextile.com